Parameter 1-10 Motor Construction
[0] Asynchron
[1] PM, non salient SPM
[3] PM, salient IPM
Parameter 1-35 Main Reactance (Xh)
x
Parameter 1-37 d-axis Inductance (Ld)
x
x
Parameter 1-38 q-axis Inductance (Lq)
x
Parameter 1-39 Motor Poles
x
x
x
Parameter 1-40 Back EMF at 1000 RPM
x
x
Parameter 1-42 Motor Cable Length
x
x
x
Parameter 1-43 Motor Cable Length Feet
x
x
x
Parameter 1-44 d-axis Inductance Sat. (LdSat)
x
Parameter 1-45 q-axis Inductance Sat. (LqSat)
x
Parameter 1-46 Position Detection Gain
x
x
Parameter 1-48 Current at Min Inductance for d-axis
x
Parameter 1-49 Current at Min Inductance for q-axis
x
Parameter 1-50 Motor Magnetisation at Zero Speed
x
Parameter 1-52 Min Speed Normal Magnetising [Hz]
x
Parameter 1-55 U/f Characteristic - U
x
Parameter 1-56 U/f Characteristic - F
x
Parameter 1-62 Slip Compensation
x
Parameter 1-63 Slip Compensation Time Constant
x
Parameter 1-64 Resonance Dampening
x
Parameter 1-65 Resonance Dampening Time Constant
x
rameter 1-66 Min. Current at Low Speed
x
x
Parameter 1-70 Start Mode
x
x
Parameter 1-71 Start Delay
x
x
x
parameter 1-72 Start Function
x
x
x
Parameter 1-73 Flying Start
x
x
x
Parameter 1-80 Function at Stop
x
x
x
Parameter 1-90 Motor Thermal Protection
x
x
x
parameter 2-00 DC Hold Current
x
x
x
Parameter 2-01 DC Brake Current
x
x
x
Parameter 2-02 DC Braking Time
x
x
x
Parameter 2-04 DC Brake Cut In Speed [Hz]
x
x
x
Parameter 2-06 Parking Current
x
x
AU363928304090en-000101 / 130R0982 | 43
Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide