Danfoss VLT AutomationDrive FC 302, Instruction Manual

Page: 5 / 174

6.1 How to Program the Adjustable Frequency Drive
52
6.1.1 Quick Set-up Parameters 52
6.1.2 Basic Set-up Parameters 55
6.2 How to Program the Active Filter 77
6.2.1 Using the Low Harmonic Drive in NPN Mode 77
6.3 Parameter Lists - Adjustable Frequency Drive 78
6.3.1 Parameter Selection 78
6.4 Parameter Lists - Active Filter 110
7 Application Examples
119
7.1 Introduction 119
7.2 Application Examples 119
7.3 Connection Examples for Control of Motor with External Signal Provider 124
7.3.1 Start/Stop 124
7.3.2 Pulse Start/Stop 124
7.3.3 Speed Up/Down 125
7.3.4 Potentiometer Reference 125
8 Status Messages
126
8.1 Status Display 126
8.2 Status Message Definitions 126
9 Warnings and Alarms
129
9.1 System Monitoring 129
9.2 Warning and Alarm Types 129
9.2.1 Warnings 129
9.2.2 Alarm Trip 129
9.2.3 Alarm Trip Lock 129
9.3 Warning and Alarm Displays 129
9.4 Warnings and Alarm Definitions - Adjustable Frequency Drive 130
9.5 Warning and Alarm Definitions - Filter (Left LCP) 139
10 Basic Start-up Troubleshooting
146
11 Specifications
149
11.1 Power-Dependent Specifications 149
11.1.1 Line Power Supply 3x380–480 V AC 149
11.1.2 Derating for Temperature 152
11.2 Mechanical Dimensions 153
11.3 General Technical Data - Adjustable Frequency Drive 156
Contents Instruction Manual
MG37A222 Danfoss A/S © Rev. 2014-02-07 All rights reserved.