9-23 Parameters for Signals
Option:
Function:
[1603]
Status Word
[1605]
Main Actual Value [%]
[1609]
Custom Readout
[1610]
Power [kW]
[1611]
Power [hp]
[1612]
Motor Voltage
[1613]
Frequency
[1614]
Motor current
[1615]
Frequency [%]
[1616]
Torque [Nm]
[1618]
Motor Thermal
[1622]
Torque [%]
[1630]
DC Link Voltage
[1633]
Brake Energy /2 min
[1634]
Heatsink Temp.
[1635]
Inverter Thermal
[1638]
SL Controller State
[1639]
Control Card Temp.
[1650]
External Reference
[1652]
Feedback[Unit]
[1653]
Digi Pot Reference
[1657]
Feedback [RPM]
[1660]
Digital Input
[1661]
Terminal 53 Setting
[1662]
Analog Input 53
[1663]
Terminal 54 Setting
[1664]
Analog Input AI54
[1665]
Analog Output 42 [mA]
[1667]
Pulse Input 29[Hz]
[1668]
Pulse Input 33 [Hz]
[1669]
Pulse Output 27 [Hz]
[1670]
Pulse Output 29 [Hz]
[1671]
Relay Output
[1672]
Counter A
[1673]
Counter B
[1679]
Analog Output AO45
[1680]
Fieldbus CTW 1
[1682]
Fieldbus REF 1
[1684]
Comm. Option STW
[1685]
FC Port CTW 1
[1690]
Alarm Word
[1691]
Alarm Word 2
[1692]
Warning Word
[1693]
Warning Word 2
[1694]
Ext. Status Word
[1695]
Ext. Status Word 2
[1697]
Alarm Word 3
[3401]
PCD 1 Write For Application
[3402]
PCD 2 Write For Application
[3403]
PCD 3 Write For Application
[3404]
PCD 4 Write For Application
[3405]
PCD 5 Write For Application
9-23 Parameters for Signals
Option:
Function:
[3406]
PCD 6 Write For Application
[3407]
PCD 7 Write For Application
[3408]
PCD 8 Write For Application
[3409]
PCD 9 Write For Application
[3410]
PCD 10 Write For Application
[3421]
PCD 1 Read For Application
[3422]
PCD 2 Read For Application
[3423]
PCD 3 Read For Application
[3424]
PCD 4 Read For Application
[3425]
PCD 5 Read For Application
[3426]
PCD 6 Read For Application
[3427]
PCD 7 Read For Application
[3428]
PCD 8 Read For Application
[3429]
PCD 9 Read For Application
[3430]
PCD 10 Read For Application
[3450]
Actual Position
[3456]
Track Error
9-27 Parameter Edit
Option:
Function:
Parameters can be edited via PROFIBUS, the
standard RS485 interface, or the LCP.
[0]
Disabled Disables editing via PROFIBUS.
[1]
*
Enabled Enables editing via PROFIBUS.
9-28 Process Control
Option:
Function:
Process control (setting of control word, speed
reference, and process data) is possible via either
PROFIBUS or standard fieldbus, but not both
simultaneously. Local control is always possible via
the LCP. Control via process control is possible via
either terminals or fieldbus depending on the
settings in
parameter 8-50 Coasting Select
to
parameter 8-56 Preset Reference Select
[0]
Disable
Disables process control via PROFIBUS master
class 1, and enables process control via standard
fieldbus or PROFIBUS master class 2.
[1]
*
Enable
cyclic
master
Enables process control via PROFIBUS master class
1, and disables process control via standard
fieldbus or PROFIBUS master class 2.
9-44 Fault Message Counter
Range:
Function:
0
*
[0 -
65535 ]
Indicates the number of fault events presently
stored in
. The buffer
capacity is maximum 8 error events. The buffer
and counter are set to 0 by reset or power-up.
Parameter Descriptions
VLT
®
AutomationDrive FC 360
80
Danfoss A/S © 7/2015 All rights reserved.
MG06C602
4
4
