Danfoss VLT Automation Drive FC 360, Programming Manual

Page: 128 / 156

Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conversion
index
Type
1-66 Min. Current at Low Speed 50% All set-ups TRUE 0 Uint32
1-7* Start Adjustments
1-70 PM Start Mode [0] Rotor Detection All set-ups TRUE – Uint8
1-71 Start Delay 0 s All set-ups TRUE -1 Uint8
1-72 Start Function [2] Coast/delay time All set-ups TRUE – Uint8
1-73 Flying Start ExpressionLimit All set-ups TRUE – Uint8
1-75 Start Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
1-76 Start Current ExpressionLimit All set-ups TRUE -2 Uint32
1-78 Compressor Start Max Speed [Hz] 0 Hz All set-ups TRUE -1 Uint16
1-79 Compressor Start Max Time to Trip 5 s All set-ups TRUE -1 Uint8
1-8* Stop Adjustments
1-80 Function at Stop [0] Coast All set-ups TRUE – Uint8
1-82 Min Speed for Function at Stop [Hz] 0 Hz All set-ups TRUE -1 Uint16
1-9* Motor Temperature
1-90 Motor Thermal Protection [0] No protection All set-ups TRUE – Uint8
1-93 Thermistor Source [0] None All set-ups FALSE – Uint8
5.2.3 2-** Brakes
Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conversion
index
Type
2-0* DC-Brake
2-00 DC Hold/Motor Preheat Current 50% All set-ups TRUE 0 Uint16
2-01 DC Brake Current 50% All set-ups TRUE 0 Uint16
2-02 DC Braking Time 10 s All set-ups TRUE -1 Uint16
2-04 DC Brake Cut In Speed 0 Hz All set-ups TRUE -1 Uint16
2-06 Parking Current 100% All set-ups TRUE 0 Uint16
2-07 Parking Time 3 s All set-ups TRUE -1 Uint16
2-1* Brake Energy Funct.
2-10 Brake Function [0] Off All set-ups FALSE – Uint8
2-11 Brake Resistor (ohm) ExpressionLimit All set-ups FALSE -1 Uint16
2-12 Brake Power Limit (kW) ExpressionLimit All set-ups TRUE 0 Uint32
2-14 Brake voltage reduce 0 V All set-ups FALSE 0 Uint16
2-16 AC Brake, Max current 100% All set-ups TRUE -1 Uint16
2-17 Over-voltage Control [0] Disabled All set-ups TRUE – Uint8
2-19 Over-voltage Gain 100% All set-ups TRUE 0 Uint16
2-2* Mechanical Brake
2-20 Release Brake Current 0 A All set-ups TRUE -2 Uint32
2-22 Activate Brake Speed [Hz] 0 Hz All set-ups TRUE -1 Uint16
2-23 Activate Brake Delay 0.0 s All set-ups TRUE -1 Uint8
Parameter Lists
VLT
®
AutomationDrive FC 360
126 Danfoss A/S © 7/2015 All rights reserved. MG06C602
5 5