Danfoss VLT Automation Drive FC 360, Programming Manual

Page: 17 / 156

3.3 Status Menu
After power-up, Status Menu is active. Press [Menu] to
toggle between
Status , Quick Menu , and Main Menu .
[
▲
] and [
▼
] toggle between the options in each menu.
The display indicates the status mode with a small arrow
above
Status .
130BA466.10
Illustration 3.5 Indicating Status Mode
3.4 Main Menu
The Main Menu gives access to all parameters.
1. To enter Main Menu , press [Menu] until the
indicator in the display is placed above Main
Menu .
2.
[
▲
] [
▼
]: Browse through the parameter groups.
3. Press [OK] to select a parameter group.
4.
[
▲
] [
▼
]: Browse through the parameters in the
specific group.
5. Press [OK] to select the parameter.
6.
[
►
] and [
▲
] [
▼
]: Set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice (or 3 times for
array parameters) to enter
Main Menu , or press
[Menu] once to enter Status .
See Illustration 3.6 , Illustration 3.7 , and Illustration 3.8 for the
principles of changing the value of continuous,
enumerated, and array parameters, respectively. The
actions in the illustrations are described in
Table 3.4 ,
Table 3.5 , and Table 3.6 .
130BC446.10
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
1
2
3
4
5
6
7
10
11
12
OK
OK
Back
8
Back
Setup 1
2 x
+ OK
9
OK
Illustration 3.6 Main Menu Interactions - Continuous
Parameters
Programming Programming Guide
MG06C602 Danfoss A/S © 7/2015 All rights reserved. 15
3 3