Danfoss VLT Automation Drive FC 360, Programming Manual

Page: 135 / 156

Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conversion
index
Type
9-75 DO Identification 0 N/A All set-ups TRUE 0 Uint16
9-80 Defined Parameters (1) 0 N/A All set-ups FALSE 0 Uint16
9-81 Defined Parameters (2) 0 N/A All set-ups FALSE 0 Uint16
9-82 Defined Parameters (3) 0 N/A All set-ups FALSE 0 Uint16
9-83 Defined Parameters (4) 0 N/A All set-ups FALSE 0 Uint16
9-84 Defined Parameters (5) 0 N/A All set-ups FALSE 0 Uint16
9-90 Changed Parameters (1) 0 N/A All set-ups FALSE 0 Uint16
9-91 Changed Parameters (2) 0 N/A All set-ups FALSE 0 Uint16
9-92 Changed Parameters (3) 0 N/A All set-ups FALSE 0 Uint16
9-93 Changed Parameters (4) 0 N/A All set-ups FALSE 0 Uint16
9-94 Changed Parameters (5) 0 N/A All set-ups FALSE 0 Uint16
9-99 PROFIBUS Revision Counter 0 N/A All set-ups TRUE 0 Uint16
5.2.11 12-** Ethernet
Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conversion
index
Type
12-0* IP Settings
12-00 IP Address Assignment [10] DCP 1 set-up TRUE – Uint8
12-01 IP Address 0 N/A 1 set-up TRUE 0 OctStr[4]
12-02 Subnet Mask 0 N/A 1 set-up TRUE 0 OctStr[4]
12-03 Default Gateway 0 N/A 1 set-up TRUE 0 OctStr[4]
12-04 DHCP Server 0 N/A 1 set-up TRUE 0 OctStr[4]
12-05 Lease Expires 0 N/A All set-ups TRUE 0 TimD
12-06 Name Servers 0 N/A 1 set-up TRUE 0 OctStr[4]
12-07 Domain Name 0 N/A 1 set-up TRUE 0 VisStr[48]
12-08 Host Name 0 N/A 1 set-up TRUE 0 VisStr[48]
12-09 Physical Address 0 N/A 1 set-up TRUE 0 VisStr[17]
12-1* Ethernet Link Parameters
12-10 Link Status [0] No Link All set-ups TRUE – Uint8
12-11 Link Duration ExpressionLimit All set-ups TRUE 0 TimD
12-12 Auto Negotiation [1] On 1 set-up TRUE – Uint8
12-13 Link Speed [0] None 1 set-up TRUE – Uint8
12-14 Link Duplex [1] Full Duplex 1 set-up TRUE – Uint8
12-8* Other Ethernet Services
12-80 FTP Server [0] Disabled 1 set-up TRUE – Uint8
12-81 HTTP Server [0] Disabled 1 set-up TRUE – Uint8
12-82 SMTP Service [0] Disabled 1 set-up TRUE – Uint8
12-89 Transparent Socket Channel Port 4000 N/A 1 set-up TRUE 0 Uint16
12-9* Advanced Ethernet Services
12-90 Cable Diagnostic [0] Disabled 1 set-up TRUE – Uint8
12-91 Auto Cross Over [1] Enabled 1 set-up TRUE – Uint8
12-92 IGMP Snooping [1] Enabled 1 set-up TRUE – Uint8
12-93 Cable Error Length 0 N/A 1 set-up TRUE 0 Uint16
12-94 Broadcast Storm Protection -1 % 1 set-up TRUE 0 Int8
12-95 Broadcast Storm Filter [0] Broadcast only 1 set-up TRUE – Uint8
12-96 Port Config ExpressionLimit 1 set-up TRUE – Uint8
12-98 Interface Counters 4000 N/A All set-ups TRUE 0 Uint32
12-99 Media Counters 0 N/A All set-ups TRUE 0 Uint32
Parameter Lists Programming Guide
MG06C602 Danfoss A/S © 7/2015 All rights reserved. 133
5 5