Description of parameters
vacon · 77
24-hour support: +358 (0)201 212 575 • Email: [email protected]
5
5.5.2
Delayed digital output 1 & 2
2.5.2.1
Dig.Out 1 Signal
2.5.3.1
Dig.Out 2 Signal
Connect the delayed DO1 signal to the digital output of your choice with this parameter.
2.5.2.2 DO1
Content
2.5.3.2 DO2
Content
0 = Not used
1 = Ready
2 = Run
3 = Fault
4 = Fault inverted
5 = FC overheat warning
6 = Ext. fault or warning
7 = Ref. fault or warning
8 = Warning
9 = Reverse
10 = SynchronisedToD7
11 = Start Command given
12 = FB DIN2
13 = FB DIN3
14 = ID.Bit DO, See P2.4.x.5
2.5.2.3
DO1 ON Delay
2.5.3.3
DO2 ON Delay
2.5.2.4
DO1 OFF Delay
2.5.3.4
DO2 OFF Delay
With these parameters you can set the on and off delays to digital outputs.
Signal
DO
On
Delay
Off
Delay
Figure 24.
Digital outputs 1 and 2, on- and off-delays