Description of parameters
vacon · 111
24-hour support: +358 (0)201 212 575 • Email: [email protected]
5
P2.14.1.6 Control Output Signal ID
ID1585
“ContrlOutSignID”
This parameter defines which parameter is forced to On and Off values when selected
input signal exceeds the set limits.
P2.14.1.7 Control Mode
ID1586
“Control Mode”
This parameter defines how the value control output behaves.
0 = SR ABS
Absolute input value is used to make a step change in the output between On and Off
values.
Off
value
On
value
Control
Off
value
Control
On
Value
Off
value
On
value
Negative
Positive
Figure 44.
1 = Scale ABS
Absolute input value is scaled linearly between On and Off values.
Off
value
On
value
Control
Off
value
Control
On
Value
Off
value
On
value
Negative
Positive
Figure 45.
2 = Scale ABS Inverted
Inverted absolute value is scaled linearly between On and Off values.
