![background image](http://html1.mh-extra.com/html/danfoss/vacon-nxp/vacon-nxp_applications-manual_3534727114.webp)
112 · vacon
Description of parameters
Tel. +358 (0)201 2121 • Fax: +358 (0)201 2121 205
5
Off
value
On
value
Control
Off
value
Control
On
Value
Off
value
On
value
Negative
Positive
Figure 46.
3 = SR
Input value is used to make a step change in the output between On and Off values.
4 = Scale ABS
Input values is scaled linearly between On and Off values.
5 = Scale Inverted
Inverted value is scaled linearly between On and Off values
P2.14.1.8 Control Signal Filtering TC
ID1586
“Control Filt TC”
This parameter is used to filter the scaling function output. This can be used, for
example, when unfiltered torque is used to control a parameter that needs stabilisation.
5.14.2
DIN ID control
This function is used to control any parameter between two different values with a digital input.
Different values are given for DI LOW and DI HIGH.
SEL
G
IN 0
IN 1
DI
ID Control Digital Input
P
Value for LOW
P
Value for High
P
DIN Controlled ID
Figure 47.
P2.14.2.1 ID Control Digital Input ID1570
“ID Control DIN”
P2.14.3.1 ID Control Digital Input ID1590
“ID Control DIN”
P2.14.4.1 ID Control Digital Input ID1578
“ID Control DIN”
Select a digital input to be used for controlling the parameter selected by ID1571.
P2.14.2.2 DIN Controlled ID
ID1571
“Controlled ID”
P2.14.3.2 DIN Controlled ID
ID1575
“Controlled ID”