Dalsa Linea2 5GigE, User Manual

Page: 62 / 164

Linea2 5GigE Series Camera Operational Reference • 55
Display Name Feature & Values Description Standard
& View
Input Pixel Size pixelSizeInput Size of the image input pixels, in bits per pixel.
< RO > Guru
DFNC
8 Bits/Pixel Bpp8 Sensor output data path is 8 bits per pixel.
10 Bits/Pixel Bpp10 Sensor output data path is 10 bits per pixel.
12 Bits/Pixel Bpp12 Sensor output data path is 12 bits per pixel.
Sensor Width SensorWidth Defines the sensor width in active pixels.
< RO>
Expert
Sensor Height SensorHeight Defines the sensor height in active lines.
< RO>
Expert
Line Spatial Correction sensorLineSpatialCorrection Sets the number of lines of delay between color output
planes from the sensor for spatial correction. Stop
acquisition to change. Beginner
DFNC
Direction Source
sensorScanDirectionSource Specifies whether scan direction is controlled by a feature
or external signal. Beginner
DFNC
Internal Internal Direction controlled by “ Internal Scan Direction ” feature.
Rotary Encoder Encoder Direction determined from Rotary Channel A and B phase.
Line 1 GPIO1 Direction controlled by GPIO 1, Forward: Low; Reverse:
High.
Line 2 GPIO2 Direction controlled by GPIO 2, Forward: Low; Reverse:
High
Line 3 GPIO3 Direction controlled by GPIO 3, Forward: Low; Reverse:
High
Line 4 GPIO4 Direction controlled by GPIO 4, Forward: Low; Reverse:
High
Internal Scan Direction sensorScanDirection When "Scan Direction Source" feature is Internal, this
feature specifies the direction. Beginner
DFNC
Forward Forward Forward scan direction.
Reverse Reverse Reverse scan direction
Acquisition Line Rate (in
Hz)
AcquisitionLineRate Specifies the camera internal line rate, in Hz. Beginner
Exposure Mode ExposureMode Sets the operation mode for the camera’s exposure (or
electronic shutter).
Beginner
Timed Timed The exposure duration time is set using the Exposure Time
feature and the exposure starts with a FrameStart event.
Trigger Width TriggerWidth Uses the width of the trigger signal pulse to control the
exposure duration. Use the Trigger Activation feature to
set the polarity of the trigger. The Trigger Width setting is
applicable with Trigger Selector = Single Frame
Trigger(Start). Note that the Line Inverter feature setting
may affect the polarity of the trigger signal and is only
available when exposureAlignment = Reset.
Exposure Time Selector exposureTimeSelector Selects the color plane for which to set an exposure time.
Applicable only when the Exposure Mode feature is set to
Timed. Beginner
DFNC
All All Set all color planes to the same exposure time. Applicable
only when the Exposure Mode feature is set to Timed.
Blue Blue Set the blue color plane exposure time. Applicable only
when the Exposure Mode feature is set to Timed.
Green Green Set the green color plane exposure time. Applicable only
when the Exposure Mode feature is set to Timed.
Red Red Set the red color plane exposure time. Applicable only
when the Exposure Mode feature is set to Timed.
NIR NIR Set the NIR color plane exposure time. Applicable only
when the Exposure Mode feature is set to Timed.
Exposure Time (in us
) ExposureTime Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed. Beginner