60
•
Operational Reference
Linea2 5GigE Series Camera
I/O Control Feature Descriptions
Display Name
Feature & Values
Description
Standard
& View
Trigger Selector
TriggerSelector
Selects which type of trigger to configure with the various
Trigger features.
Beginner
Single Line Trigger(Start)
LineStart Selects a trigger starting the capture of a single line.
Single Frame Trigger(Start)
FrameStart Selects a trigger starting the capture of a single frame.
Frame size is determined by image format feature
“Height”.
MultiFrame Trigger(Start)
FrameBurstStart Selects a trigger to capture multiple frames. The number
of frames is specified by the triggerFrameCount feature.
Frame Active
FrameActive Selects a trigger to capture an active frame.
Frame Burst Active
FrameBurstActive Selects a trigger to capture an active frame.
Trigger Mode
TriggerMode
Controls the enable state of the selected trigger.
Beginner
Off
Off The selected trigger is turned off.
On
On The selected trigger is active.
Trigger Frames Count
triggerFrameCount
Sets the number of frames to acquire when a valid trigger
is received. This feature is available when
Trigger Selector
=
MultiFrame Trigger(Start)
.
Beginner
DFNC
Software Trigger
TriggerSoftware
Generate a software command internal trigger
immediately no matter what the TriggerSource feature is
set to.
Beginner
Trigger Source
TriggerSource
Specifies the internal signal or physical input line to use
as the trigger source. The selected trigger must have its
TriggerMode set to ON.
(Note: source availability may depend on the Trigger
Selector setting.)
Beginner
Line 1
Line1 Select Line 1 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Line 2
Line2 Select Line 2 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Line 3
Line3 Select Line 3 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Line 4
Line4 Select Line 4 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Rotary Encoder
RotaryEncoder1 Select Rotary Encoder to use as the external line trigger
source.
DFNC
Trigger Input Line
Activation
TriggerActivation
Select the activation mode for the selected Input Line
trigger source. This is applicable only for external line
inputs.
Beginner
Rising Edge
RisingEdge The trigger is considered valid on the rising edge of the
line source signal (after any processing by the line
inverter feature).
Falling Edge
FallingEdge The trigger is considered valid on the falling edge of the
line source signal (after any processing by the line
inverter feature).
Any Edge
AnyEdge The trigger is considered valid on any edge (falling or
rising) of the line source signal (after any processing by
the line inverter feature).
Level High
LevelHigh The trigger is considered valid on the high level of the line
source signal.
Level Low
LevelLow The trigger is considered valid on the low level of the line
source signal.
Trigger Delay (in us)
TriggerDelay
Specifies the delay in microseconds to apply after
receiving the trigger and before activating the
triggerEvent.
Beginner
