6
•
Linea2 5GigE Series Overview
Linea2 5GigE Series Camera
Sensor Performance
The sensor description below provides a specification table and response graphics. The graph
describes the sensor response to different wavelengths of light (excluding lens and light source
characteristics). Visible light spans wavelengths between about 390
–
780 nm. Wavelengths below
390 nm are termed ultraviolet while those above 780 nm are termed infrared.
Sensor Specifications
Item / Feature
Specification
Camera Model
L2-GC-04K03N-00
Sensor Used
High speed CMOS line scan
Minimum Line Rate
0 (external trigger) / 300 Hz (internal trigger)
Maximum Line Rate
32 kHz RGBN
42 kHz RGB (available in future release)
Maximum Line Rate Output
System dependent on the GigE network
Exposure Time
5 μs to
3000
μs
Default settings (μs):
Blue: 93
Green: 49
Red: 57
NIR 21
External Trigger to Start of
Exposure Active
~0.30 μs minimum
Horizontal Line Readout Time
7.8
μs
Pixel Size
7 µm x 7 µm
Pixel Format
User selectable 8-bit or 12-bit (coming soon)
Output Dynamic Range
71 dB (typical at minimum sensor gain)
> 56 dB (factory calibration)
Random Noise
< 4.8 DN rms
DC Offset
28 DN (FFC enabled)
PRNU
< 2% pk-pk @ 50% Saturation (FFC enabled)
FPN
< 7 DN pk-pk (FFC enabled)
SEE
Red (650 nm) 15 nJ / cm
2
Green (550 nm) 25 nJ / cm
2
Blue (480 nm) 34 nJ / cm
2
NIR (840 nm) 37 nJ / cm
2
NEE
< 100 pJ / cm
2
Anti-blooming
> 100 x Saturation
Integral non-Linearity
< 2% DN
Test Conditions
•
All values specified with 12-bit data, unless otherwise noted
•
Measured at 1x nominal sensor analog and digital gain
•
5 kHz line rate or greater
•
Light sources: broadband white LED and 850 nm LED
•
Front plate temperature: < 45° C
