110
•
Operational Reference
Linea2 5GigE Series Camera
Display Name
Feature & Values
Description
Standard
& View
Device Link Throughput
Limit
DeviceLinkThroughputLimitMode
When disabled, lower level TL specific features are
expected to control the throughput. When enabled,
DeviceLinkThroughputLimit controls the overall
throughput.
Guru
Off
Off
Disables the DeviceLinkThroughputLimit feature.
On
On
Enables the DeviceLinkThroughputLimit feature.
Device Link Throughput
Limit (in %)
deviceLinkThroughputLimitRatio
Limits the maximum bandwidth of the data that will
be streamed out by the device. This value is set as a
percentage of the maximum link speed detected by
the Camera.
Beginner
DFNC
Device Link Throughput
Limit (in Bps)
DeviceLinkThroughputLimit
Limits the maximum bandwidth of the data that will
be streamed out by the device.
Guru
Stream Channel Selector
GevStreamChannelSelector
Selects the stream channel to control.
Expert
Maximum Link Speed
gevLinkSpeedLimit
Maximum speed the device will advertise during
autonegotiation. Changes will take effect on the next
boot.
Guru
DFNC
2.5 GigE
Speed_2500 The link is limited up to the 2500Base-t (2.5 GigE)
link speed.
1 GigE
Speed_1000 The link is limited up to the 1000Base-t (1 GigE) link
speed.
Automatic
Automatic Link speed limit is autonegotiated with the device
connected to the camera (switch or NIC) at 1, 2.5 or
5 GigE.
Device Link Speed (in Mbps) GevLinkSpeed
Indicates the transmission speed negotiated by the
given network interface. (RO)
Expert
PacketSize (in B)
GevSCPSPacketSize
Specifies the stream packet size in bytes to send on
this channel.
Expert
Interpacket Delay
GevSCPD
Indicates the delay (in timestamp unit) to insert
between each packet for this stream channel. Note
that Interpacket delay becomes a Read-Only value
when the feature "Device Link Throughput Limit" is
enabled.
Expert
Packet Resend Buffer Size
(in MB)
devicePacketResendBufferSize
Indicates the amount of memory to reserve in MBytes
for the packet resend buffer. Increasing or decreasing
this value affects the value returned by
transferQueueMemorySize.
DFNC
Guru
Interface Selector
GevInterfaceSelector
Selects which physical network interface to control.
Beginner
IP Configuration Status
GevIPConfigurationStatus
Reports the current IP configuration status. (RO)
Guru
None
None Device IP Configuration is not defined.
PersistentIP
PersistentIP Device IP Address Configuration is set to Persistent IP
(static).
DHCP
DHCP Device IP Address Configuration is set to DHCP
(Dynamic Host Configuration Protocol). Network
requires a DHCP server.
LLA
LLA Device IP Address Configuration is set to LLA (Link-
Local Address). Also known as Auto-IP. Used for
unmanaged networks including direct connections
from a device to a dedicated NIC.
ForceIP
ForceIP Device IP Address Configuration is set to ForceIP.
Used to force an IP address change.
Current IP Address
GevCurrentIPAddress
Reports the IP address for the given network
interface. (RO)
Beginner
Current Subnet Mask
GevCurrentSubnetMask
Reports the subnet mask of the given interface. (RO)
Beginner
Current Default Gateway
GevCurrentDefaultGateway
Reports the default gateway IP address to be used on
the given network interface. (RO)
Beginner
Current IP set in LLA
GevCurrentIPConfigurationLLA
Controls whether the LLA (Link Local Address) IP
configuration scheme is activated on the given
network interface. (RO)
Guru
