manualshive.com logo in svg

Daikin MicroTech II, Installation And Maintenance Manual

Share
Download
Daikin MicroTech II Installation And Maintenance Manual Download Page 3

T

able

 

of

 C

onTenTs

www.DaikinApplied.com 

3 

ED 15062-7 • MICROTECH II CHILLER CONTROLLER

Condenser Entering Water Temperature . . . . . . . . 50
Condenser Flow Switch Status  . . . . . . . . . . . . . . . 51
Condenser Leaving Water Temperature  . . . . . . . . 52
Condenser Pump Run Hours. . . . . . . . . . . . . . . . . 53
Condenser Refrigerant Pressure . . . . . . . . . . . . . . 54
Condenser Saturated Refrigerant Temperature. . . 55
Condenser Water Flow Rate . . . . . . . . . . . . . . . . . 56
Condenser Water Pump Status . . . . . . . . . . . . . . . 57
Cool Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cool Setpoint   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Design RPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Device Object. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Evaporator Entering Water Temperature . . . . . . . . 61
Evaporator Flow Switch Status  . . . . . . . . . . . . . . . 62
Evaporator Leaving Water Temperature for Unit . . 63
Evaporator Leaving Water Temperature for 

Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Evaporator Pump Run Hours. . . . . . . . . . . . . . . . . 65
Evaporator Refrigerant Pressure . . . . . . . . . . . . . . 66
Evaporator Saturated Refrigerant Temperature. . . 67
Evaporator Water Flow Rate . . . . . . . . . . . . . . . . . 68
Evaporator Water Pump Status . . . . . . . . . . . . . . . 69
Heat Recovery Entering Water Temperature . . . . . 70
Heat Recovery Leaving Water Temperature  . . . . . 70
Heat Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Heat Setpoint   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Ice Setpoint  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
IGV Percentage Open . . . . . . . . . . . . . . . . . . . . . . 73
Inverter Temperature . . . . . . . . . . . . . . . . . . . . . . . 73
Liquid Line Refrigerant Pressure . . . . . . . . . . . . . . 74
Liquid Line Refrigerant Temperature . . . . . . . . . . . 75

Maximum RPM  . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Maximum Send Time . . . . . . . . . . . . . . . . . . . . . . . 76
Minimum RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Minimum Send Time  . . . . . . . . . . . . . . . . . . . . . . . 77
Motor Cavity Temperature . . . . . . . . . . . . . . . . . . . 78
Oil Feed Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . 79
Oil Feed Temperature  . . . . . . . . . . . . . . . . . . . . . . 80
Oil Sump Pressure. . . . . . . . . . . . . . . . . . . . . . . . . 81
Oil Sump Temperature . . . . . . . . . . . . . . . . . . . . . . 82
Outdoor Air Temperature . . . . . . . . . . . . . . . . . . . . 83
Power Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Pump Select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Receive Heartbeat . . . . . . . . . . . . . . . . . . . . . . . . . 86
Run Enabled  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Alarms-BACnet .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 87

Alarm Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Fault Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Problem Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Warning Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

BACnet Alarm Handling  . . . . . . . . . . . . . . . . . . . . . . 87

Alarm Annunciation  . . . . . . . . . . . . . . . . . . . . . . . . 87
Poll Multiple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Poll Singular. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Clearing Alarms-BACnet   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 91

BACnet Alarm Messages  . . . . . . . . . . . . . . . . . . . . . 91

Summary of Contents for MicroTech II









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands