manualshive.com logo in svg

Daikin MicroTech II, Installation And Maintenance Manual

Share
Download
Daikin MicroTech II Installation And Maintenance Manual Download Page 2

ED 15062-7 • MICROTECH II CHILLER CONTROLLER 

2 

www.DaikinApplied.com

T

able

 

of

 C

onTenTs

T

able

 

of

 C

onTenTs

Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Revision History  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Software Revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reference Documents  . . . . . . . . . . . . . . . . . . . . . . . . 6
Chiller Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Controller Data Points . . . . . . . . . . . . . . . . . . . . . . . . . 7
Protocol Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

BACnet Protocol  . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LONWORKS Network . . . . . . . . . . . . . . . . . . . . . . . 7

Basic Protocol Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

BACnet Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MicroTech II Chiller Unit Controller Device Object . . 9
Network Considerations. . . . . . . . . . . . . . . . . . . . . . 9

LONWORKS Networks . . . . . . . . . . . . . . . . . . . . . . . 10

Typical Application: Minimum Integration  .  .  .  .  .  .  .  . 14

Set up the Unit for Network Control . . . . . . . . . . . . 14
Setup for all Other Chillers MicroTech II Network 

Control:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display Important Data Points . . . . . . . . . . . . . . . . 14

Comprehensive Data Point Tables   .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

BACnet Standard Objects . . . . . . . . . . . . . . . . . . . . . 15

Chiller Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chiller Alarm Objects . . . . . . . . . . . . . . . . . . . . . . . 18

LONWORKS Variables . . . . . . . . . . . . . . . . . . . . . . . 19

Network Output Variables  . . . . . . . . . . . . . . . . . . . 19
Network Input Variables . . . . . . . . . . . . . . . . . . . . . 20
Network Configuration Parameters . . . . . . . . . . . . 20

Detailed Data Point Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 21

Active Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Actual Capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Actual RPM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Capacity Limit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Capacity Limit Output. . . . . . . . . . . . . . . . . . . . . . . 25
Capacity Limit Setpoint  . . . . . . . . . . . . . . . . . . . . . 25
Chiller Enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chiller Enable  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chiller Limited  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chiller Local/Remote . . . . . . . . . . . . . . . . . . . . . . . 28
Chiller Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chiller Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chiller Mode Output . . . . . . . . . . . . . . . . . . . . . . . . 30
Chiller Mode Setpoint. . . . . . . . . . . . . . . . . . . . . . . 31
Chiller ON OFF  . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Chiller Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Chiller Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chiller Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Compressor 2 Active Capacity Limit  . . . . . . . . . . . 35
Compressor 2 VFD Speed  . . . . . . . . . . . . . . . . . . 35
Compressor Current  . . . . . . . . . . . . . . . . . . . . . . . 36
Compressor Discharge Temperature . . . . . . . . . . . 37
Compressor Percent RLA  . . . . . . . . . . . . . . . . . . . 38
Compressor Power  . . . . . . . . . . . . . . . . . . . . . . . . 40
Compressor Run Hours . . . . . . . . . . . . . . . . . . . . . 42
Compressor Select  . . . . . . . . . . . . . . . . . . . . . . . . 43
Compressor Starts . . . . . . . . . . . . . . . . . . . . . . . . . 44
Compressor Status  . . . . . . . . . . . . . . . . . . . . . . . . 45
Compressor Suction Line Temperature . . . . . . . . . 47
Compressor Voltage  . . . . . . . . . . . . . . . . . . . . . . . 48

Summary of Contents for MicroTech II









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands