Daikin MicroTech II Installation And Maintenance Manual Download

Page: 5 / 104

nTroduCTIon

www.DaikinApplied.com

ED 15062-7 • MICROTECH II CHILLER CONTROLLER

nTroduCTIon

Limited Warranty

Consult your local Daikin Applied Representative for warranty

details. To find your local Daikin Applied Representative, go to

www.DaikinApplied.com

Revision History

Version

Release Date

Description

ED 15062-0

January 2, 2003

Initial release.

ED 15062-1

June 30, 2004

1. Added WGZ and WGS to Table 3.
2. Changed BACnet Communication

Module Firmware Rev number from

3.09 to 1.03.
3. Added BCM.CIT to Software

Revision Table.
4. Added WGS to front page and

Chiller Model table.
5. Changed the “Full Reference” label

in the “Variable Details” tables to

“Object Name.”
6. Removed Device Object

Name and Property from the “Full

Reference”(Object Name.)
7. Added units to “Who is Frequency”

description.

ED 15062-1

May 18, 2005

1. Added HSC and TSC to front page

and Chiller Model table.

ED 15062-2

November 20, 2005

1. Corrected BACnet Alarm Table
2. Added WCC to front page, Chiller

Models and Alarm Table
3. Updated “Set up the Unit for

Network Control” section

ED 15062-3

June 30, 2006

Removed all references to BACnet IP/

Ethernet. Refer to ED 15100 (new)

ED 15062-4

February 2, 2009

Removed information regarding

the previous BACnet MS/TP

communication module (PN

350147406) which has been replaced

with a new hardware/firmware platform

(PN 350147407). Added references to

TGZ chiller. Added 76800 baud rate.

Added information in the Configuring

the Unit Controller section regarding

the BACnet Configuration Tool,

which is required for setting certain

parameters with the new BACnet

communication module.

ED 15062-5

April 20, 2009

Removed Table 1 (Receive Heartbeat

Variables) and replaced Data Integrity

section with new text description

of ncidefaults and nciRcvHrtbt

interaction.

ED 15062-6

Jan 21, 2013

Added individual compressor data

points.

ED 15062-7

June 25, 2015

Specified that hours are reported at

1/10th the actual hours. Corrected

Compressor Status for BACnet to be

an enumerated value, not a bit field.

Removed references to out-dated

software/firmware. Added clarification

to “Actual Capacity” data point for

centrifugal chillers. Changed branding.

Changed description of Chiller On Off

data point.

Software Revision

This edition documents the following versions of the

standard MicroTech

II BACnet

Communication Module

and LONWORKS

Communication Module software and all

subsequent revisions until otherwise indicated. However, if

your software is of a later revision, some of the information in

this document may not completely describe your software.

Software

Revision

LONWORKS

Communication Module Firmware

CHCHLA24

BACnet

Communication Module Application Software Version

2.00

Summary of Contents for MicroTech II









































































































Search results

Summary of Contents for MicroTech II

Reviews:

Related manuals for MicroTech II

Brands by name

Popular brands

Daikin MicroTech II, Installation And Maintenance Manual

Search results

Summary of Contents for MicroTech II

Reviews:

Related manuals for MicroTech II

Brands by name

Popular brands