User's Manual
278
a device offline alarm in the specified period.
●
Click View Schedule to view detailed schedule settings.
●
If the schedule is not added or the added schedule does not meet actual needs, click
Add Schedule. See "8.8.4 Schedule" for detailed information.
Step 6
Click Actions to set alarm actions. See "8.4.1 Alarm Actions" for detailed information.
Step 7
Click Save.
8.4.3.3 IPC External Alarm
Set IPC alarm input event, so that when there is an alarm input to the IPC, IPC uploads the alarm to
the Device. If the camera has multiple IO channels, you can set the alarm input event for each of
them as you might need.
Step 1
Click
, or click
on the configuration page, and then select EVENT.
Step 2
Select a remote device in the device tree on the left.
Step 3
Select External Alarm > IO1.
Figure 8-64 IO1
Step 4
Click
to enable the alarm.
Step 5
Set parameters.
Table 8-24 Local alarm parameters description
Parameters
Description
Name
In the Alarm name box, enter a name for the alarm.
Type
Select alarm input device type. Both NO and NC are supported.
Debouncing
The system records only one event during this period.
Step 6
Click Deployment Time to select schedule from the drop-down list.
After setting deployment period, system triggers corresponding operations when there is
a motion detection alarm in the specified period.
●
Click View Schedule to view detailed schedule settings.
●
If the schedule is not added or the added schedule does not meet actual needs, click
Summary of Contents for DHI-IVSS7008
