Dahua Technology DHI-IVSS7008 User Manual Download Page 139

Page: 139 / 381

User's Manual

119

Figure 6-78 Human detection

●

Point to the snapshot, and then click

to add the face image to face database. For details, see "

Adding from Detection Snapshots".

This function is available when face image is captured.

●

Point to the snapshot, and then click

or double-click the picture to play back the video

record (10 s before and after the snapshot).

●

Point to the snapshot, and then click

to export the video record to specified saving path.

●

Point to the snapshot, and then click

to search for similar targets in the snapshot records.

Make sure that USB storage device is connected during local operation.

6.5.3.3.2 Motor Vehicle

On the LIVE page, click

, the VEHICLE TOTAL page is displayed.

Click

, and then select Vehicle Recognition, the information of detected vehicles is displayed.

Figure 6-79 Motor vehicle detection

●

Point to the panel, and then click

to add the license plate image to plate database. For

details, see "6.8.3.2.3 Adding from Detection Results".

●

Point to the panel, and then click

, or double-click detected picture to play back the video

record (10 s before and after the snapshot).

●

Point to the panel, and then click

to export the video record to specified saving path.

Make sure that USB storage device is connected during local operation.

6.5.3.3.3 Non-motor Vehicle

On the LIVE page, click

Click

, and then select Snap With Face and Snap Without Face. The information of detected

non-motor vehicles is displayed.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands