Dahua Technology DHI-IVSS7008 User Manual Download

Page: 22 / 381

User's Manual

2 The Grand Tour

This section introduces front panel, rear panel, port function and button function, indicator light
status, and so on.

2.1 8-HDD Series

2.1.1 Front Panel

Figure 2-1 Front panel

Table 2-1 Front panel description

No.

Button/Port

Description

Power

Boot up or shut down device. Power indicator light

status is as follows:

●

When device is off (indicator light is off), press the

button for a short period to boot up device.

●

When device is running, (blue indicator light is

on), press the button for at least 4 seconds to shut
down the device.

Alarm indicator light

Displays local input alarm status.

●

The indicator light is off: There is no local alarm

input event.

●

Red indicator light is on: There is local alarm input

event.

System status indicator
light

Displays the system running status.

●

The blue light is on: Device is running properly.

●

The indicator light is off: The device is not

running.

Network indicator light

Displays current network status.

●

The indicator light is blue: It means at least one

Ethernet port has connected to the network.

●

The indicator light is off: No Ethernet ports are

connected to the network.

USB

Connects to external devices such as USB storage
device, keyboard and mouse.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands