Dahua Technology DHI-IVSS7008 User Manual Download Page 250

Page: 250 / 381

User's Manual

230

The result of IP modification is displayed.

Step 6

Click OK.

8.2.2.3 Configuring Remote Devices

Set remote device property, connection information, and video parameters.

The page displayed might vary with remote devices. See the actual page for detailed information.

8.2.2.3.1 Configuring Device Property

Set remote device name, and view device information.
Step 1

Click

, or click

on the configuration page, and then select DEVICE.

Step 2

Select a remote device on the left panel and then click Property tab.

Figure 8-8 Property

Step 3

Set parameters.

Table 8-2 Property parameters description

Parameters

Description

Name

Set remote device name.
Enable Sync to remote device and save the settings to synchronize

new name to the remote device.

Description

Input remote device description.

Device info

Displays remote device information. It includes remote device type,

SN, MAC address, video in/out, audio in/out, alarm in/out, and system

version.

Step 4

Click Save.

8.2.2.3.2 Configuring Connection Information

Set connection information of remote device, such as IP address and port number.
Step 1

Click

, or click

on the configuration page, and then select DEVICE.

Step 2

Select a remote device on the left panel and then click the Connection tab.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands