Dahua Technology DHI-IVSS7008 User Manual Download Page 164

Page: 164 / 381

User's Manual

144

selected.

4) (Optional) Drag

to adjust the transparency of panel. The higher the value, the more

transparent the panel.

5) (Optional) Select the features to be displayed in the panel.

●

Up to 4 features can be displayed.

●

4 features are selected by default. To select another feature, click the selected

feature to cancel it, and then click the feature to be displayed.

Step 5

Click OK.

6.7.3.2 Live View

On the LIVE page, select a view, and the video image of the view is displayed.

●

Tracking box is displayed in the video image.

●

Features panel is displayed at the right side of the video image.

Figure 6-112 Live

Point to the features panel, and the operation icons are displayed.

●

Click

to add license plate information to the plate database. For details, see "6.8.3.2.3 Adding

from Detection Results".

●

Click

or double-click the vehicle image to play back the video image (10 s before and after

the snapshot).

6.7.3.3 Detection Statistics

On the LIVE page, select a view and then click

. The VEHICLE TOTAL page is displayed.

Click

, and then select Vehicle Detection. The information of detected vehicles is displayed.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands