Dahua Technology DHI-IVSS7008 User Manual Download Page 40

Page: 40 / 381

User's Manual

No.

Button/Port

Description

VGA port

VGA video output port. It outputs analog video

signal. The VGA port and HDMI 1 port are same

source output.

HDMI port

High definition audio and video signal output port.

The port outputs the uncompressed high definition

video and multi-channel audio data to the connected

display with HDMI port. The three HDMI ports are

different source output.

RESET button

Reserved.

AI module indicator light

Displays AI module status.

●

The yellow light flashes: AI module is running

properly.

●

The yellow light is on: AI module is

malfunctioning.

This function is not available without AI module.

Figure 2-29 IVSS7124 rear panel (single power)

Figure 2-30 IVSS7124-M rear panel (redundant power)

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands