Dahua Technology DHI-IVSS7008 User Manual Download Page 48

Page: 48 / 381

User's Manual

3.3.3 16/24-HDD Series

If you have not pushed the HDD box to the bottom, do not close the handle to avoid any damage to
the HDD slot.

Installing HDD

①

Press the button on the

front panel of IVSS, open the
handle, and then pull out the

HDD box.

②

Put the HDD into the box

along the direction shown in

the figure.

③

Lock the screws on the

back of the HDD box. Insert

the box into the HDD slot,

push it to the bottom, and

then close the handle.

In the figure, you only need
to lock one set of the screws
(Group A or Group B). See the
actual situation.

Removing HDD

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands