Dahua Technology DHI-IVSS7008, User Manual

Page: 281 / 381

User's Manual
261
Figure 8-43 Local alarm out
Step 2 Select alarm output port.
You can select multiple alarm output ports.
Step 3 Set delay time.
Set a delay time. After alarm event is ended, alarm will end after the delay time. You can
configure from 0 seconds through 300 seconds, and the default value is 10 seconds.
8.4.1.8 Remote Device Alarm Output
Set remote device alarm output. The system can link the corresponding alarm output device to
output alarm when an alarm occurs.
Make sure that the remote device has been added, and the remote device is connected with alarm
output device. See "5.4.2 Adding Remote Device" for detailed information.
Step 1
Click Actions and select Remote Device Alarm Output.
Figure 8-44 Remote device alarm output settings
Step 2 Select a remote device and alarm output port.
You can select multiple alarm output ports.
Step 3 (Optional) Repeat Step 1–Step 2, and link multiple remote alarm output devices.
8.4.1.9 Access
Set access control function. When there is an alarm, system can trigger the corresponding access
control device to open door and close door.
Make sure that access control device has been added. See "5.4.2 Adding Remote Device" for detailed
information.
Step 1
Click Actions and select Access.
Figure 8-45 Access
Step 2 Select access control device.