User's Manual
162
Step 3
Select AI Application > Crowd Distribution Map > Rule Config.
Step 4
Click
next to Enabled to enable rule configuration.
Step 5
Set detection rules.
●
Set regional detection rules.
1) Click Add Rule.
Figure 6-134 Add Rules
2) Drag
to adjust the size.
3) Configure alarm threshold. Alarm is triggered when the detected people number
reaches the threshold.
●
Set global alarm.
1) Click
, and then drag
to adjust the size of the yellow area.
2) Click
to enable global detection.
3) Set crowd density. Alarm is triggered when the detected crowd density reaches the
threshold.
Step 6
Select a schedule from the Deployment Time drop-down list.
The alarm linkage action is triggered only during the scheduled period.
To modify the schedule, click Add Schedule.
Step 7
Click Actions, and then select an action to be associated to the alarm.
Step 8
Click Save.
6.9.3 Live View of Crowd Distribution
On the LIVE page, open a view that contains the crowd distribution detection camera.
The video shows people numbers and distribution status in the detection areas in real time. The area
frame flashes red when there is an alarm in the area.
Summary of Contents for DHI-IVSS7008
