Dahua Technology DHI-IVSS7008 User Manual Download Page 283

Page: 283 / 381

User's Manual

263

Audio and light alarm is available when AI by camera is used for IVS detection and the camera
supports this function.
Step 1

Click Actions and select Camera Audio and Remote Warning Light.

Figure 8-47 Camera audio

Figure 8-48 Remote warning light

Step 2

Configure the parameters.

Table 8-18 Audio and light alarm parameters

Parameter

Description

Camera Audio

File Name

Select the audio file to be played when an alarm is

triggered.

Play Mode

Set the play times of audio file.

Remote Warning
Light

Mode

Select Flicker or Always on.

Flicker Frequency

When Flicker is selected as Mode, set the flicker

frequency.

Duration

Set how long the warning light flickers or keeps on
after an alarm is triggered.

8.4.2 Local Device

Set IVSS alarm event, including abnormal event, device offline alarm, AI application, and local device
alarm.

8.4.2.1 One-click Disarming

Disarm alarm linkage actions as needed to avoid interference caused by alarms.
Step 1

Click

, or click

on the configuration page, and then select EVENT.

Step 2

Select the root node in the device tree.

Step 3

Select Overview > Disarming.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands