Dahua Technology DHI-IVSS7008 User Manual Download Page 77

Page: 77 / 381

User's Manual

●

If information about remote device is not filled in completely, improve it after

importing template.

●

If the system fails to add the remote device, check the reason on the Status column,

change the remote device information and then click Retry to try to add again.

Figure 5-22 Confirm

Step 6

Click Continue to add or Finish.

●

Click Continue to add, device goes back to Smart add page to add more remote

device.

●

Click Finish to complete adding remote device process. Device displays Device

manager page to view the newly added remote device information.

Summary of Contents for DHI-IVSS7008






























































































































































































































































































































































































Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands

Dahua Technology DHI-IVSS7008, User Manual

Search results

Summary of Contents for DHI-IVSS7008

Reviews:

Related manuals for DHI-IVSS7008

Brands by name

Popular brands