Dahua Technology DHI-IVSS7008, User Manual

Page: 277 / 381

User's Manual
257
Device.
●
Select remote device in the device tree on the left, to set alarm event of this remote device.
●
The alarm event might be different depending on the model you purchased.
●
means that the corresponding alarm event has been enabled.
●
means that AI by camera has been enabled; means that AI by device has been enabled;
means that both have been enabled.
Figure 8-36 Event management
8.4.1 Alarm Actions
System can trigger the corresponding actions when an alarm occurs.
The supported actions might be different depending on the model you purchased.
On the alarm configuration page, click Actions to display actions. Configure actions according to
your actual need.
●
After setting actions, click Save on the page.
●
After enabling actions, click to disable the corresponding actions.
Table 8-17 Actions description
Actions Description Preparation
Record
The system links the selected
remote device to record when
there is a corresponding
alarm event.
Remote device, such as IPC,
has been added. See "5.4.2
Adding Remote Device" for
detailed information.
Buzzer
The system activates a buzzer
alarm when there is a
corresponding alarm event.
–
Log
The system notes down the
alarm information in the log
when there is a
corresponding alarm event.