Daewoo Kalos User Manual Download Page 204

Page: 204 / 270

6–2 SERVICE AND VEHICLE CARE

WARNING

• Turn ignition OFF and remove the

key from the ignition before check-
ing or working under hood.

Touching live parts while ignition is
ON can result in shock or burns.

SAFETY PRECAUTIONS

When performing any inspection or
maintenance work on your vehicle, take
precautions to reduce the risk of per-
sonal injury or damage.

General precautions to observe when
performing vehicle service:

• Do not work on the engine while it

is hot.

• Never get under the vehicle while it

is supported by a jack. If it is neces-
sary to work under the vehicle, use
safety stands.

• Keep smoking materials, flames, and

sparks away from the battery, all
fuel, and fuel-related parts.

• Never connect or disconnect the bat-

tery or any transistorized compo-
nents while the ignition switch is
ON.

• When connecting the battery cables,

pay special attention to their polari-
ties. Never connect a positive cable
to a negative terminal, or a negative
cable to a positive terminal.

• Make sure there is proper ventilation

whenever you have the engine run-
ning in an enclosed space such as a
garage.

• Keep used oil, coolant, and other flu-

ids out of reach of children and pets.

• Do not dispose of empty oil and fluid

containers, or those containing used
oil or fluid, with your household
waste. Use only locally authorized
automotive waste disposal facilities.

• Remember that the battery, ignition

cables, and your vehicle wiring carry
high current or voltage. Be careful
not to cause a short circuit.

WARNING

If you must reach into the engine
compartment, remove loose clothing
and jewelry that can become caught,
and avoid placing body parts near
the fan, belts, or other moving parts.

S3W6011A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands