Daewoo Kalos User Manual Download Page 180

Page: 180 / 270

4–72 CLIMATE CONTROL AND AUDIO SYSTEM

If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.

Setting the volume for traffic announce-
ments

Press the

MENU

button (7).

Keep pressing the

button (5)

until “TAVOLUME” appears in the
display.

Set the volume using the

but-

ton (5).

To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.

When you have finished making your
changes,

press the

MENU

button (7) twice.

CD MODE

CD Playback

• If there is no CD inserted in the drive.

Gently insert the CD with the printed
side uppermost into the CD compart-
ment until you feel some resistance.

The CD will be drawn automatically
into the drive.

Do not use force when inserting the CD.
You must not hinder or assist the drive
as it draws in the CD.

CD playback begins.

• If a CD is alrendy inserted in the

drive.

Keep pressing the

SRC

button (6) un-

til “CD” appears in the display.

Playback begins from the point at which
it was last interrupted.

NOTE

You will hear a warning sound:

• if you leave the reception area of

a traffic information station that
you are currently listening to.

• if, while listening to a CD or an

AUX source, you leave the recep-
tion area of a traffic information
station that you are tuned into and
the subsequent automatic search
cannot find a new traffic informa-
tion station.

• if you retune the radio from a traf-

fic information station to a station
that does not broadcast traffic in-
formation.

NOTE

Using the volume control (3), you can
also adjust the volume during a traf-
fic announcement for the duration of
that announcement.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands