Daewoo Kalos User Manual Download Page 228

Page: 228 / 270

6–26 SERVICE AND VEHICLE CARE

S3W6361A

S3W6371A

PARKING BRAKE

The parking brake alone should hold
your vehicle on a fairly steep grade.

CHECKING PARKING BRAKE TRAVEL

Parking brake lever travel must be:

9~11 notches, with a force of approxi-
mately 20 kgf (44 lbs).

To check the parking brake stroke, do
the following:

1. Turn engine off.

2. Apply parking brake, counting notch

clicks you hear. If the number of
clicks differs from that specified
above, have your authorized repairer
adjust the parking brake.

MAINTENANCE SCHEDULE

See “SCHEDULED MAINTENANCE
SERVICES” in the service guide.

CLUTCH PEDAL

CHECKING CLUTCH PEDAL FREE PLAY

Clutch pedal free play must be:

6~12 mm (0.24~0.47 in)

To check the clutch pedal free play, do
the following:

1. Turn engine off.

2. Press clutch pedal by hand measur-

ing distance the pedal moves until
you feel resistance.

3. If free play differs from that specified

above, have your authorized repairer
adjust the clutch pedal or linkage.

BRAKE PEDAL

CHECKING BRAKE PEDAL FREE PLAY

Brake pedal free play must be:

1~8 mm (0.04~0.31 in)

1. Turn engine off.

2. Press the brake pedal several times

to deplete the vacuum in the brake
system.

3. Press brake pedal by hand, measur-

ing the distance the pedal moves
until you feel a slight resistance.

4. If free play differs from that specified

in this manual, have your authorized
repairer adjust brakes.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands