Daewoo Kalos User Manual Download Page 244

Page: 244 / 270

6–42 SERVICE AND VEHICLE CARE

WARNING

Some cleaners may be poisonous,
corrosive, or flammable.

• Improper use of these cleaners can

be dangerous. Their use may
cause personal injury or damage
to your vehicle.

VEHICLE CARE

CLEANING AGENTS

Follow the manufacturer’s advice when-
ever you use cleaning agents or other
chemicals on the inside or the outside
of your vehicle.

When cleaning the inside or outside of
your vehicle, do not use hazardous
cleaning solvents such as:

• Acetone.

• Lacquer thinners.

• Enamel reducers.

• Nail polish removers.

LUGGAGE COMPARTMENT LAMP

Bulb replacement

1. Use a flat screwdriver to pry the lamp

assembly from the lamp assembly
holder.

2. Replace the bulb. See “BULB SPECI-

FICATIONS” in the index.

3. Install the lamp assembly.

S3W6591A

DOME LAMP

Bulb replacement

1. Use a flat-blade screwdriver to pry

the lamp lens away from the head-
liner.

2. Remove the bulb.

3. Replace the bulb. See “BULB SPECI-

FICATIONS” in the index.

4. Reinstall the lamp lens.

S3W6581A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Daewoo Kalos, User Manual, Page: 244 / 270

Search results

Summary of Contents for Kalos

Reviews: