Daewoo Kalos User Manual Download Page 199

Page: 199 / 270

EMERGENCIES 5–9

S3W5042A

S3W5043A

S5W5001A

Towing your vehicle with a wheel lift

1. Turn hazard flashers on.
2. Turn ignition switch to ACC.
3. Shift either automatic or manual

transaxle to NEUTRAL.

4. Release parking brake.

CAUTION

If your vehicle must be towed from
the rear, use a towing dolly under the
front wheels.
• Never tow your vehicle from the

rear with the front wheels on the
road.

Towing your vehicle with the front
wheels on the road can cause severe
damage to your vehicle transaxle.

5. Tow the vehicle with the front wheels

off the road.

CAUTION

• Do not use sling-type equipment to

tow the vehicle.

• Use flat bed or wheel lift equip-

ment.

EMERGENCY TOWING

If towing service is not available in an
emergency, your vehicle may be tem-
porarily towed by a cable secured to
one of the emergency towing eyes un-
der the vehicle.

Front Towing Eyes

The front towing eyes are provided un-
der the front bumper. A driver must be
in the vehicle to steer it and operate the
brakes.

Towing in this manner may be done
only on hard-surfaced road for a short
distance and at low speeds.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Daewoo Kalos, User Manual, Page: 199 / 270

Search results

Summary of Contents for Kalos

Reviews: