Daewoo Kalos User Manual Download Page 194

Page: 194 / 270

5–4 EMERGENCIES

S3W5023A

WARNING

• Never get under car or start or run

the engine while car is supported
by a jack.

Vehicle may slip off the jack result-
ing in serious injury or death.

8. Raise vehicle by rotating jack handle

clockwise until lifting head fits firmly
into appropriate notch and tire is off
the ground about 1 inch (3 cm).

CAUTION

• As the jack begins to raise the ve-

hicle, make sure jack is properly
placed so it will not slip.

NOTE

Do not raise vehicle more than is nec-
essary to change wheel.

9. Remove wheel nuts or bolts com-

pletely by turning counterclock-
wise.

10. Remove tire and wheel.

11. Mount spare tire on the wheel hub.

CAUTION

• Never use oil or grease on wheel

nuts or bolts.

• Always use correct wheel nuts or

bolts.

• Using the wheel lug wrench in the

vehicle tool kit, tighten the lug nuts
or bolts down firmly.

• As soon as possible, take your car

to a authorized repairer and have
the wheel nuts or bolts tightened
according to specifications.

If tighten incorrectly, the nuts or bolts
might come loose.

Jack handle

Jack

Wheel wrench

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands