Daewoo Kalos User Manual Download Page 22

Page: 22 / 270

1–18 SEATS AND OCCUPANT PROTECTION SYSTEMS

To fold the rear seat forward to in-
crease luggage space:

1. Fold down the rear seatback.

See “FOLDING REAR SEATBACK”
earlier in this section.

2. If your vehicle is equipped with ad-

justable headrest, push the head re-
straints fully down.

See “HEAD RESTRAINTS” in the
index.

3. Pull the safety belt and safety belt

buckles out of the space between
seatback and seatback cushion.

S3W1181A

WARNING

• Do not stack luggage or other

cargo higher than the front seats.

• Do not allow passengers to sit on

rear compartment when the rear
seats are folded forward.

• Unrestrained luggage or passen-

gers in rear compartment can be
thrown about within or ejected
from the vehicle in a sudden stop
or accident.

Serious injuries or death can result.

DOUBLE FOLDING REAR SEAT
(HATCH BACK ONLY)

WARNING

• Ensure that the rear seatbacks are

all the way back and locked in
position before operating the ve-
hicle with passengers in the back
seat.

• Do not pull the release knobs on

the top of the seatback while the
vehicle is moving.

Pulling the release knobs while the
vehicle is moving can cause injuries
or damage to the occupants.

CAUTION

• Make sure the safety belts are

hooked to retaining guide.

Failure to follow this precaution can
result in the damage of your safety
belts.

6. Install the center rear safety belt.

See “REMOVABLE CENTER REAR
SAFETY BELT” in the index for in-
stallation.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands