Daewoo Kalos User Manual Download Page 138

Page: 138 / 270

4–30 CLIMATE CONTROL AND AUDIO SYSTEM

Place the CD – with its printed side
facing uppermost – onto the CD tray.

Carefully slide the CD tray back into
the magazine's guide slot. Make sure
that the CD tray is positioned straight
in the guide slot.

5. Inserting the magazine:

Slide the magazine back into the
changer until it clicks into place.

Close the door of the CD changer.

NOTE

• Always keep the door of the CD

changer closed.

• To remove a CD, proceed in the

same way as described.

Switching to CD changer mode

Keep pressing the

SRC

button (8) un-

til "CHANGER" appears in the dis-
play.

Playback begins with the first CD that
the CD changer detects.

Selecting CDs

To move up or down to another CD,

press the

button (9) once or

several times.

Selecting tracks

To move up or down to another track
on the current CD,

press the

button (9) once or

several times.

Quick track selection

To quickly select tracks backwards or
forwards,

keep one of the

buttons (9)

pressed until fast-reverse / fast-for-
ward track selection begins.

3. Removing the CD trays:

Hold one of the CD trays by the
"hook" that is located on its right
hand side (arrow in the zoomed sec-
tion of the diagram), and carefully
pull the tray out in the direction of
the arrow.

4. Inserting a CD:

EJECT

S3W4149A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands