Daewoo Kalos User Manual Download Page 70

Page: 70 / 270

2–36 INSTRUMENTS AND CONTROLS

S3W2551A

SLIDING THE SUNROOF

• To open the sunroof, press and hold

the right part of the switch.

• To close the sunroof, press and hold

the left part of the switch.

Release the switch when the sunroof
reaches the desired position.

CLOSE OPEN

CAUTION

Always observe the following precau-
tions:

• Do not stick body parts or objects

out the sunroof opening.

• Make sure the sunroof opening is

clear, inside and outside, before
opening or closing the sunroof.

• Do not place heavy objects on or

around the sunroof.

• Keep debris off the outside of the

sunroof.

As in all other times, all occupants
must wear their safety belts whether
the sunroof is open or closed.

Failure to observe these precautions
can result in injury or damage to your
vehicle.

POWER SUNROOF*

You may operate the power sunroof
when the ignition is ON.

S3W2532A

WARNING

• Avoid using the dome lamp and

map lights while driving in the
dark.

A lighted passenger compartment re-
duces visibility in the dark, and could
cause a collision.

(without Sunroof)

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands