Daewoo Kalos User Manual Download Page 223

Page: 223 / 270

SERVICE AND VEHICLE CARE 6–21

S3W6251A

WARNING

Electric ignition systems have
greater voltage than conventional
systems.

• Do not touch components of igni-

tion system. Touching ignition sys-
tem components could cause shock
or electrocution, resulting in seri-
ous injuries.

CAUTION

Spark plugs can become extremely
hot and could cause serious injury.

• Do not handle hot spark plugs.

SPARK PLUGS

IGNITION SYSTEM

If you experience reduced performance
or fuel economy, follow the procedure
to inspect and clean spark plugs.

MAINTENANCE SCHEDULE

See “SCHEDULED MAINTENANCE
SERVICES” in the service guide.

CLEANING THE AIR CLEANER

If the air cleaner element is dirty, you
may try to clean it as follows:

1. Shake the air cleaner element to re-

move surface dust.

2. Clean the inside of the air cleaner

housing.

3. Cover the open filter housing with a

damp cloth while cleaning the ele-
ment.

4. Clean air filter element by blowing

compressed air through it in the di-
rection opposite normal airflow.

Normal
air flow

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands