Daewoo Kalos User Manual Download Page 235

Page: 235 / 270

SERVICE AND VEHICLE CARE 6–33

S3W6481A

CAUTION

• Do not use tools that can conduct

electricity when removing a blown
fuse. Use only provided fuse puller.

Using conductor such as metal can
cause a short circuit, damaging the
electrical system or start a fire. Seri-
ous injury could occur.

4. Determine what caused the fuse to

blow, and repair that problem.

5. Install a new fuse of the rating speci-

fied in this manual. (See fuse block
layout later in this section)

CAUTION

Using a fuse substitute or a fuse of
the wrong type or rating can dam-
age the electrical system or even start
a fire.

• Use only specified fuse and do not

use a different type or rating other
than specified in this manual.

Such use can result in personal inju-
ries or damage to your vehicle or
other property.

NOTE

Three spare fuses (10A, 15A and
20A) are provided in the fuse and
relay block in the engine compart-
ment.

FUSE BLOCK

• Interior fuse block is located in the

left side of the instrument panel.

• Engine room fuse block is next to the

coolant reservoir.

Interior fuse block

S4W6482A

Engine room fuse block

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Daewoo Kalos, User Manual, Page: 235 / 270

Search results

Summary of Contents for Kalos

Reviews: