Daewoo Kalos User Manual Download Page 233

Page: 233 / 270

SERVICE AND VEHICLE CARE 6–31

NOTE

• SAE class S-type chains are the

proper type for your vehicle.

• Always drive slowly when you are

using tire chains.

• If you hear the chains contacting

the vehicle, stop and re-tighten the
chains.

• If the contact continues, slow down

until it stops.

CAUTION

Driving with clogged filter element
can overheat the blower motor and
damage it.

• Replace filter at the intervals speci-

fied in the section, “MAINTE-
NANCE SCHEDULE”.

AIR CONDITIONER FILTER*

The filter removes dust, pollen and
many other airborne irritants from out-
side air which is drawn in by your heat
and ventilation system.

FILTER REPLACEMENT

1. Open the glove box halfway down.

2. Grip the glove box by both the up-

per and lower side.

3. Pull the glove box out of the hous-

ing.

S3W6461A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands