Daewoo Kalos User Manual Download Page 111

Page: 111 / 270

CLIMATE CONTROL AND AUDIO SYSTEM 4–3

CONTROL PANEL

1. Temperature control knob.

2. Fan control knob.

3. Air distribution mode knob.

4. Air conditioning (A/C) button*. See

“AIR CONDITIONING” later in
this section.

TEMPERATURE CONTROL KNOB

The temperature control knob controls
the temperature of the air that comes
through the air vents.

Turn the knob to the blue area to get
cool air and to the red area to get warm
air.

5. Recirculation button.

6. Rear window and outside mirror*

defroster button. See “REAR WIN-
DOW DEFROSTER BUTTON” in
the index.

S5W4001A

S3W4031A

( A/C)

(Heater only)

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands