Daewoo Kalos User Manual Download Page 192

Page: 192 / 270

5–2 EMERGENCIES

WARNING

Always store jack, spare tire, other
tools and equipment securely in their
proper location.

• Do not store jack, spare tire, or

other equipment in passenger com-
partment.

In sudden stop or collision, loose
equipment can be thrown around in-
side your vehicle and cause personal
injuries.

SPARE TIRE, JACK AND VEHICLE
TOOLS

Your spare tire, jack and tools are se-
cured in the luggage compartment.

Secure the spare tire under the floor
cover.

Store the jack and the tools in the stor-
age of the luggage compartment. Be
sure to secure these tools and equip-
ments, as you found them.

See “WHEELS AND TIRES” in the
index for more information.

WARNING

We designed the jack for use on your
vehicle only.

• Do not use jack provided with

your vehicle on other vehicles.

• Never exceed the jack’s maximum

permissible load.

Use of this jack on other vehicles
may damage the other vehicles or
your jack and lead to personal in-
jury.

1430 lbs
(650 kg)

Lithium

1 National Lubricating
Grease Institute (NLGI)

Maximum
Working Load

Grease Type

Grease Class

Jack specification

NOTE

To eliminate the possibility of the
jack, jack handle and tools rattling
while the car is moving, stow them
securely under the floor covering.

S3W5011A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands