Daewoo Kalos User Manual Download Page 136

Page: 136 / 270

4–28 CLIMATE CONTROL AND AUDIO SYSTEM

NOTE

• You can set the scantime. For fur-

ther details, read the section en-
titled "Setting the scantime" in the
"Radio mode" chapter.

• In order to be able to use the

S-CPS, RPT and SCAN functions,
there must be a pause of at least
three seconds between each track
on the cassette.

Scanning all the tracks on a cassette (SCAN)

You can briefly play (scan) all the
tracks on a cassette.

Press the

SCAN

button (16).

"CAS SCAN" appears in the display.
All the tracks on the cassette are briefly
played in ascending order.

To stop scanning,

press the

SCAN

button (16) again.

The currently scanned track will then
continue to be played normally.

Pausing playback

You can pause the cassette whilst it is
playing,

to do so, press the

button (13).

Playback is paused and "PAUSE" ap-
pears in the display.

To cancel pause mode,

press the

button (13) again.

Switching radiomonitor on/off

NOTE

You can only switch the radio-moni-
tor on/off whilst a cassette is playing.

Press the

MENU

button (12).

Keep pressing the

button (9)

until "RM ON" or "RM OFF“ ap-
pears in the display.

Press the

button (9) to

switch the radiomonitor on/off.

When you have finished making your
changes,

press the

MENU

button (12).

Switching blankskip on/off

Press the

MENU

button (12).

Keep pressing the

button (9)

until "BLK SKIP" appears in the dis-
play.

To switch blankskip on/off,

press the

button (9).

When you have finished making your
changes,

press the

MENU

button (12) twice.

Skipping blank spaces (blankskip)

You can automatically skip blank
spaces on the tape that are longer than
ten seconds. To do so, the blankskip
feature must be activated.

NOTE

You can only switch "blankskip" on/
off whilst a cassette is playing.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Daewoo Kalos, User Manual, Page: 136 / 270

Search results

Summary of Contents for Kalos

Reviews: