Daewoo Kalos User Manual Download Page 165

Page: 165 / 270

CLIMATE CONTROL AND AUDIO SYSTEM 4–57

Handling CDs

Avoid touching the playing surface of
the CD. Only hold the CD at its centre
and edge.

After use, store CDs in their cases.

Never expose CDs to direct sunlight or
high temperatures.

NOTE

Using the cleaning tape too often can
damage the audio head.

NOTE

• Never open the units' casings

• Never spill liquid into or onto the

units.

Cleaning the unit

• If the front of the unit is dusty, wipe

it clean with a dry, dust-free cloth.
Switch the unit off beforehand.

• Never use turpentine, turpentine sub-

stitute (thinners) or alcohol to clean
the unit. These fluids can damage the
plastic and remove the labelling
from the keys.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands