Daewoo Kalos User Manual Download Page 217

Page: 217 / 270

SERVICE AND VEHICLE CARE 6–15

RECOMMENDED MANUAL TRANSAXLE
FLUID AND MAINTENANCE SCHEDULE

Recommended manual transaxle fluid

See “FLUID CHART” in the index for
recommended manual transaxle fluid
and capacity.

Maintenance schedule

See “SCHEDULED MAINTENANCE
SERVICES” in the service guide.

3. Remove filler plug.

4. Make sure the fluid reaches the bot-

tom edge of the filler plug hole.

CAUTION

Heat from engine, transaxle or fluid
can cause severe burns.

• Make sure the transaxle is cool to

the touch before you attempt this
procedure.

Working on the engine before it has
cooled properly can result in personal
injuries.

CAUTION

Too much fluid will decrease vehicle
performance.

• Do not overfill the manual

transaxle fluid.

This can damage the transaxle.

7. Visually check the transaxle case for

leaks or damage.

5. If the level is low, add fluid until it

begins to run out the filler hole.

6. After filling to the correct level, re-

install the plug securely.

S3W6131A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands