manualshive.com logo in svg

Daewoo Kalos, User Manual, Page: 64 / 270

Share
Download
Daewoo Kalos User Manual Download Page 64

2–30  INSTRUMENTS AND CONTROLS

 

v

v

v

v

v

 WARNING

Children can operate and become
entrapped in power windows.

• Do not leave your keys or unat-

tended children in your car.

Serious injury or death can occur
from misuse of power windows.

POWER WINDOWS*

You may operate the power windows
when the ignition switch is ON by us-
ing the power window switches on each
door panel.

NOTE

The rear windows do not open fully.

 

v

v

v

v

v

 WARNING

Body parts outside vehicle can be
struck by passing objects.

• Keep all parts of body inside

vehicle.

To raise the window, lift up on the
switch.
To lower the window, press down on
the switch.
Release the switch when the window
reaches the desired position.

 

v

v

v

v

v

 WARNING

Children can operate and become
entrapped in power windows. Seri-
ous injury or death can occur.

• Use power window lock when

children are in back seat.

POWER WINDOW LOCK BUTTON

The power window lock button allows
you to lock the rear and passenger win-
dow buttons. With the lock on, the rear
and passenger windows can only be op-
erated from the driver’s window control
panel.

S5W2007A

S5W2008A

Summary of Contents for Kalos















































































































































































































































































Reviews:

No comments