Daewoo Kalos User Manual Download Page 229

Page: 229 / 270

SERVICE AND VEHICLE CARE 6–27

CAUTION

Your vehicle is equipped with a cata-
lytic converter.

• Do not use leaded fuel in this ve-

hicle.

CATALYTIC CONVERTER

On vehicles with a catalytic converter,
the fuel tank has a narrow filler neck
which makes it impossible to insert a
nozzle for leaded fuel.

CAUTION

• Do not drive your vehicle if the

engine is running roughly or lacks
power. These symptoms can point
to serious mechanical problems.

Operating your vehicle under these
conditions can cause serious damage
to the catalytic converter and other
parts of the vehicle.

Consult a authorized repairer as soon
as possible if any of the following oc-
cur:

• Engine misfires.

• Engine runs rough following a cold

start.

• Engine loses power.

• Vehicle exhibits unusual operating

conditions which may indicate a
fault in the ignition system.

CAUTION

• Avoid frequent repeated cold starts.
• Do not hold the key in START for

more than 15 seconds while trying
to start your vehicle.

• Do not let the fuel tank run dry.
• Do not start the engine by pushing

or towing your vehicle. Use jump
starting.

Failure to follow these instructions
may damage your vehicle engine,
fuel, and/or emission systems.

Make sure to have all your vehicle
maintenance done by a authorized re-
pairer.

This will insure that:

• All vehicle components operate cor-

rectly.

• Your vehicle will have minimal ex-

haust emissions.

• Your vehicle’s catalytic converter sys-

tem will have a long life.

S3W6391A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands