Daewoo Kalos User Manual Download Page 149

Page: 149 / 270

CLIMATE CONTROL AND AUDIO SYSTEM 4–41

Instantaneously reducing the volume
(mute)

You can instantaneously reduce the vol-
ume (mute) to a level preset by you.

Briefly press button (1).

"MUTE" appears in the display.

Setting The Mute Level:

You can set the unit's volume mute
level.

Press the

MENU

button (11).

Keep pressing the

button (8)

until "MUTE LVL" appears in the
display.

Set the mute level using the

button (8).

When you have finished making your
changes,

press the

MENU

button (11) twice.

Adjusting the volume

The system volume can be adjusted in
steps from 0 (off) to 41 (maximum).

To increase the system volume,

turn the knob/pushbutton (1) in a
clockwise direction.

To decrease the system volume,

turn the knob/pushbutton (1) in an
anticlockwise direction.

Setting the power-on volume:

You can set the volume that you want
the unit to play at when it is
switched on.

Press the

MENU

button (11).

Keep pressing the

button (8)

until "ON VOL" appears in the dis-
play.

Set the power-on volume using the

button (8).

To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.

When you have finished making your
changes,

press the

MENU

button (11) twice.

NOTE

To protect your hearing, the power-
on volume is limited to a value of
"30". If the volume level was higher
when the unit was switched off and
the power-on volume was set to "0",
the unit will switch on again with a
volume level of "30".

If you change the setting to "0", the
power-on volume will be the same as
the volume level that you heard before
the unit was last switched off.

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands