Daewoo Kalos User Manual Download Page 169

Page: 169 / 270

CLIMATE CONTROL AND AUDIO SYSTEM 4–61

RECEPTION INTERFERENCE

Radio reception is affected by the
station’s signal strength and the distance
to the radio station, buildings, bridges,
mountains, etc.

Variations in reception quality can be
caused by external influences.

DISPLAY

1. Volume spectrum display.

2. Main display area.

3. Dolby symbol, illuminates when the

Dolby function is activated.

4. RPT indicator, illuminates when the

repeat function is activated.

5. RDS indicator, illuminates when the

RDS function is activated.

6. MIX indicator, illuminates when

the MIX function is activated (only
if a CD changer is connected).

7. lo indicator, illuminates when the

seek tuning sensitivity is set to “lo”.

8. PTY indicator, illuminates when

PTY is activated.

9. Traffic jam symbol, illuminates

when radio traffic information is
activated.

10. X-BASS indicator, illuminates when

X-BASS is activated.

11. CD symbol, illuminates if a CD is

in the unit.

N4W4173A

Summary of Contents for Kalos















































































































































































































































































Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands

Daewoo Kalos, User Manual

Search results

Summary of Contents for Kalos

Reviews:

Related manuals for Kalos

Brands by name

Popular brands