xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
81
config log_save_timing
Purpose
Used to configure the method of saving log files to the switch’s flash memory.
Syntax
config log_save_timing [time_interval <min 1–65535> | on_demand | log_trigger]
Description
This command allows the user to configure the time method used in saving log files to the
switch’s flash memory.
Parameters
time_interval <min 1–65535>
– Use this parameter to configure the time interval that will
be implemented for saving log files. The log files will be save every x number of minutes
that are configured here.
on_demand
– Users who choose this method will only save log files when they manually
tell the Switch to do so, using the
save
or
save log
command.
log_trigger
– Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the time interval as every 30 minutes for saving log files
:
D G S – 3 4 2 6 : 5 # c o n f i g l o g _ s a v e _ t i m i n g t i m e _ i n t e r v a l 3 0
C o m m a n d : c o n f i g l o g _ s a v e _ t i m i n g t i m e _ i n t e r v a l 3 0
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show log_save_timing
Purpose
Used to display the method configured for saving log files to the switch’s flash memory.
Syntax
show log_save_timing
Description
This command allows the user to view the time method configured for saving log files to
the switch’s flash memory.
Parameters None.
Restrictions None.
Example usage:
To configure the time interval as every 30 minutes for saving log files
:
D G S – 3 4 2 6 : 5 # s h o w l o g _ s a v e _ t i m i n g
C o m m a n d : s h o w l o g _ s a v e _ t i m i n g
S a v i n g l o g m e t h o d : e v e r y 3 0 m i n u t e ( s )
D G S – 3 4 2 6 : 5 #
